2016 KTM 350 EXC-F
We use our own and third party cookies in order to improve your experience and our service. With the aid of cookies we analyze the typical use pattern of visitors to the website. Your continued use of our website shall be conclusively deemed acceptance of the use of cookies. For further information please read our Privacy Policy.
2016 KTM 350 EXC-F
Best in class
The 350 EXC-F is the ultimate machine when you want to ride your bike to the off-road trails. Thanks to its compact, powerful DOHC engine, low weight and perfectly tuned suspension, this machine masters each and every tough spot in off-road riding with ease. And thanks to its license plate, you can ride the bike right from your house and enjoy the street or the dirt. For 2016 the 350 EXC-F gets the same updates as the dirt-only XCF-W models for even more capability when the asphalt ends.
250 agility with 450 power
The 350cc 4-stroke engine with a state-of-the-art electronic fuel injection offers a very wide power band and is distinguished by a dynamic but easy to control power delivery.
Cylinder head
The DOHC cylinder head contains four ultra-lightweight titanium valves (intake 36.3mm, exhaust 29.1mm), which allow extremely high engine speed levels of up to 12,000 rpm in combination with very small, DLC-coated followers that weigh only 8g. The camshaft timing is perfectly tuned for performance in an enduro-specific low-rev range.
Valve train
The crankshaft drives an intermediate shaft on the side which in turn drives the coolant pump and the two camshafts via the cam chain while at the same time acting as a counter balancer. A hydraulic chain tensioner ensures reliable chain tension to achieve highly precise valve timing.
Crankshaft
The 350 EXC-F has a heavier crankshaft in order to achieve a more even power delivery and better traction through greater rotating mass. The crankshaft employs a plain big end bearing, while two force-fitted bearing shells run directly on the crank pin. The necessary oil feed for this bearing is delivered by the engine's pressure lubrication. This design increases the engine's long-term durability, lengthening crankshaft service intervals - a customer benefit in terms of time, effort and cost.
The engine is equipped with a kickstarter as well as an electric starter as standard. Well protected behind the cylinder, the electric starter is connected to the freewheel on the ignition rotor via the starter drive in the ignition cover.
DDS clutch
The one-piece basket of the DDS clutch (damped diaphragm steel) is machined from solid high-tensile steel in one solid part together with the primary drive gear. This process guarantees unbeatable reliability and, together with the thin steel linings, contributes to the narrow engine width due to a compact rivet-less design. The diaphragm spring makes it possible to implement an additional rubber damping system inside the clutch hub, ensuring reliability for the transmission and excellent traction. Finally, the hydraulic clutch mechanism by Brembo in conjunction with the diaphragm spring provides a very light clutch operation and controllable modulation.
Transmission
The 6-speed gear box is specially matched to the power delivery of the 350cc engine and any kind of dual sport riding. It is distinguished by easy and precise shifting.
The 350 EXC-F engine is equipped with a 196 W AC generator with integrated starter freewheel. The generator provides sufficient energy for the fuel injection, lighting and other electrical loads. Compared to the 350 SX-F, the oil-cooled rotor has a larger diameter with a bigger flywheel mass and requires a larger ignition cover.
Engine Management System (EMS)
The Engine Management System by Keihin with electronic fuel injection and a 42mm throttle body ensures a spontaneous response and maximum engine performance.
The bodywork has been designed ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail.
The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired.
All EXC models are fitted with the super strong, tapered Neken handlebar made of high tensile strength aluminum alloy. The proven standard KTM mount allows to fix the handlebar in four different positions. Hand guards made of a 2-component polymer ensure durability and effective hand protection.
The speedometer by MAE integrates all the warning and indicator lights, except the turn signals, in a single unit. This gives the cockpit a clean and minimal look, with clear and readily available information.
The large capacity fuel tank is constructed of lightweight polyethylene and specifically designed for off-road use. A
1/4 -turn bayonet filler cap features a release mechanism for quick and easy refueling.
New graphics with clear lines visually underscore the exacting standards of what KTM deems a true, cutting-edge off-road dual sport bike.
Superior chassis
The EXC's chassis is second to none and for 2016 the striking Factory orange frame color usually seen only on KTM's race team machines will return. The modern, lightweight frame design with exceptional quality and performance created by WP Performance Systems is made of lightweight, high-strength chromoly steel sections. Not only does it provide easy handling and precise cornering, but also outstanding stability.
The cast aluminum swingarm has been developed with state-of-the-art calculation and simulation software and constructed for minimum weight, optimum stiffness and precisely defined flexibility.
Suspension/damping
The EXC models feature WP suspension, which is specifically designed for dual sport riding and ensures maximum traction comprised with plenty of comfort. As expected, the compression and rebound damping can be adjusted to suit various conditions and rider preference as well as separate high and low speed shock compression adjustments.
Triple clamps
The triple clamps have been specifically designed for Enduro use and ensure precise handling on rough terrain by supporting the flex characteristics of the fork. This gives the rider the best possible feedback from the front-end of the machine to increase confidence and overall speed.
Cooling system
The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the aluminium radiators made by WP.
Exhaust system
Light and robust. The aluminium silencers on EXC models are renowned for their outstanding performance, while keeping noise to a level well within FIM rules.
Wheels and brakes
The EXC's feature new high-quality black anodized Giant rims with black spokes, that are mated to CNC-machined hubs and lightweight silver aluminum nipples for maximum stability at minimum weight. The EXC's feature Metzler Six Day DOT tires.
High-Tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in off-road, they remain unchanged for 2016.
Front fork guards
The fork protectors have been adapted to the fork shoes and are also lighter. The open design offers the same level of protection while giving easier access to the fork legs for quicker cleaning and faster maintenance.
Front axle
The front axle has been reduced in size from 26mm to 22mm to reduce weight and offer better front end feel. The adjusted offset and increased trail provides more stability.
1-cylinder, 4-stroke engine
Displacement
Kick and electric starter
Transmission
Primary drive
Secondary gear ratio
Wet, DDS multi-disc clutch, Brembo hydraulics
Keihin EMS
Frame design
Chrome-molybdenum steel central-tube frame
Front suspension
WP USD ? 48 mm
Rear suspension
WP PDS shock absorber
Suspension travel (front)
Suspension travel (rear)
Front brake
Disc brake
Rear brake
Disc brake
Front brake disc diameter
Rear brake disc diameter
X-Ring 5/8 x 1/4"
Steering head angle
1482 ± 10 mm
Ground clearance
Seat height
Tank capacity (approx.)
Weight READY TO RACE (without fuel)播放列表加载中...
正在载入...
分享视频：
嵌入代码：
拍下二维码，随时随地看视频
KTM350 EXC-F vs KTM 二冲程 越野摩托车林道对比测...
上 传 者：
内容介绍：
KTM350 EXC-F vs KTM 二冲程 越野摩托车林道对比测试
Channel Me 精选
我来说点啥
版权所有 CopyRight
| 京网文[0号 |
| 京公网安备：
互联网药品信息服务资格证：（京）-非经营性- | 广播电视节目制作经营许可证：（京）字第403号
<img src="" width="34" height="34"/>
<img src=""/>
<li data-vid="">
<img src=""/><i data-vid="" class="ckl_plays">
<li data-vid="">
<img src=""/><i data-vid="" class="ckl_plays">
<img src="///img/blank.png" data-src=""/>
<img src="///img/blank.png" data-src="http://"/>
<li data-vid="" class="cfix">
src="///img/blank.png" data-src=""/>
<i data-vid="" class="ckl_plays">
<li data-vid="" class="cfix">
src="///img/blank.png" data-src=""/><i data-vid="" class="ckl_plays">
没有数据！
{upload_level_name}
粉丝 {fans_count}
{video_count}
{description}您好，欢迎来到一呼百应采购商城！
优质KTM350SXF供货商，让采购更轻松
您所在的位置： &
KTM-350-SX-F
KTM-350-SX-F
上一条：下一条：
该商铺的 KTM350SXF 相关产品
产品信息来源：/s.html 转载请注明来自一呼百应
KTM350SXF信息分享(<font color="#FF)：
发表留言/评论：
联系电话：
您还可能关注：
公司成立：
经营类型：
选择经营类型
主营产品：
相关供应信息
优秀采购信息网友评分：
发表上市时间：
排量(cc)：349.7
最大功率(kw/r/pm)：
经济油耗(L/100km)：
油箱容量(L)：9.5
最新文章 |
最新推荐评测
350 EXC-F(在华销售)-论坛话题
二环西路13-14号恒生嘉苑1楼YAMAHA专卖店
江苏省徐州市
上海华翔路601号A座
上海市闵行区
大沥镇广云路兴沥雄摩托车城
广东省佛山市
安吉大道东侧36-27号
广西壮族自治区南宁市
350 EXC-F(在华销售)-图片
350 EXC-F(在华销售)-视频
350 EXC-F(在华销售)-口碑
工厂公示价
KTM摩托车评分榜
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
<font style="color:#EC
KTM热门车型}